Seamless gutter work in Bernalillo, NM — installation, cleaning, repair, and downspout routing. Quick drive from our Rio Rancho base.
Bernalillo is a regular stop for us. The town's mix of historic adobes near the old highway, newer subdivisions out toward the river, and the rural properties extending toward Placitas keeps us busy with a wide range of gutter work — from full seamless installs to single-run repairs.
Many older Bernalillo homes still have original sectional gutters from when they were built, and after decades of monsoon and ice they're leaking at every seam. The fix is usually a full replacement with seamless — measured on-site, fabricated to length, and color-matched to the existing trim. Most of these jobs are done in a single visit.
Newer subdivisions in Bernalillo were generally built with gutters from the start, but the install quality varies. We see a lot of poorly-pitched runs, downspouts that dump water against the foundation, and missing splash blocks. Same-day repairs handle most of these — re-pitch the run, re-route the downspout, add a splash block or extension.
Whether you're in an adobe near Camino del Pueblo, a newer build in the Lomas Encantadas area, or out on a rural property toward the Sandia foothills — we'll get you a free quote and a real schedule. Bernalillo calls are some of our quicker turnarounds.
These are the jobs we run in Bernalillo most weeks. If you've got something that isn't on the list, ask — chances are we've handled it before.
A few real Bernalillo jobs from the last few months — same approach we'd take with yours.
Original sectional gutters from the 1970s were leaking at every seam. We removed them, replaced one rotted fascia section, ran 124 feet of new color-matched seamless aluminum, and tested every downspout before we left.
A newer home had two runs pitching the wrong direction and overflowing onto the front walkway. We loosened the hangers, re-pitched both runs, added splash blocks at all four downspouts, and the front walk has stayed dry since.
A microburst had pulled a section of gutter loose and bent the downspout. We replaced the damaged section, refit the downspout, and added an extra hanger every two feet for wind resistance going forward.
Eight services, one phone call. From new seamless installs to cleaning, repair, and the handyman work other contractors won't touch.
Custom-cut on site. K-style or half-round. Aluminum or copper.
Twigs, pine needles, monsoon debris — all out.
Sagging runs, leaking seams, pulled fasteners.
Rotted boards replaced before the gutter goes back up.
Stop climbing the ladder every fall.
Properly sized, properly routed, properly attached.
Small jobs other contractors won't touch.
Outlets, fixtures, exterior lighting, basic troubleshooting.
Custom-cut seamless gutters, repair, cleaning, and downspout work — across Rio Rancho, Albuquerque, and the surrounding NM communities. Written quotes, fair pricing, no surprises.
Get a Free Quote
Juan and his crew installed seamless gutters on our whole house in one day. Color matched perfectly, every downspout drains clear, and the cleanup was spotless. Quote was fair and exactly what we paid.
Water had been pooling against our slab for years. Juan rerouted both downspouts, added extensions, and the back wall has been dry through two monsoon seasons. Smart, careful work.
Three other companies couldn't fit us in. Precision had us measured, quoted, and installed in under a week — right before the rains started. Saved my stucco.
Cleaned out the cottonwood debris from every run, repaired two sagging sections, and added gutter guards. Showed up when he said, charged what he quoted. That's all you can really ask for.
Yes — Precision Seamless Gutters services every neighborhood in Bernalillo. We're a short drive away in Rio Rancho and run trips through Bernalillo regularly.
Most Bernalillo estimates happen within 48 hours of your call. The owner does the measure himself, walks the home with you, and writes the quote on the spot or by end of day.
Pricing depends on linear footage, the number of downspouts, color choice, and whether any fascia repair is needed first. A typical home runs $8–$14 per linear foot for standard 5" K-style aluminum, more for 6" oversized or for copper. We give you an exact, all-in written quote before any work starts.
Seamless. We bring the fabrication machine to your driveway and cut each run to the exact length of your eave. No splices means no leaks — sectional gutters fail at the seams, which is why we don't install them.
Yes. We carry a wide range of factory-finished aluminum colors and can also do paint-grade if you need a custom match. We bring color samples to the estimate so you can compare them against your trim before we order.
Both. About half our work is new installation; the other half is cleaning, repair, fascia work, downspout reroutes, and gutter guard installation. We can also handle handyman and basic electrical add-ons while we're on site.
Yes. We carry general liability and workers' comp on every crew member, and we'll send proof of insurance ahead of any job that requires it. You're protected from the moment we set the ladder.
Call us: (505) 920-3299 
Monday – Saturday: 7:00 AM – 6:00 PM 
